Selection basis of wet dust collector
2020-03-13
wet dust collectorGenerally we are also called "mist eliminator", the tower mainly makes the dust-containing gas and liquid in close contact, is the use of water droplets and particles of inertial collision or the use of water and dust fully mixed action and other role to capture particles or make particles increase or stay in a fixed container to achieve water and dust separation effect of the device.
Buywet dust collectorReference can be made according to the following eight aspects:
1, water consumption: dust removal equipment consumption of water flow and sewage in the amount of wastewater treatment, and winter cold water countermeasures.
2, corrosive: purification of corrosive gases to consider what anti-corrosion measures.
3, mud treatment: mud treatment must strive to reducewet dust collectorThe degree of pollution hazards encountered.
4. Hydrophobicity: Its requirements for the purification efficiency of hydrophobic dust are not too strict, and it is generally inappropriate to operate at the design value
5, adhesion: wet dust collector can purify the adhesive dust, but need to consider washing and cleaning, so as not to block.
6, operation and maintenance: normal should avoid moving/rotating parts in the dust collector, pay attention to the gas through the flow channel section is too small will produce blockage.
7. Operation flexibility: To operate the equipment at will, one must think of its load and whether it will affect the collection efficiency when the air flow exceeds/falls below the design value. At the same time, one must also master how to operate when the concentration of dust is unstable/continuously higher than the design value.
8, dust removal efficiency: the level of efficiency is an important criterion for the selection of wet dust collector, a certain state of gas flow specific dust pollutants, the state of the gas is a direct impact on the capture efficiency.
The next one-
REAL-TIME NEWS
Yangzhou Jiaming Environmental Protection Technology Co., Ltd.
Address: Fangxiang Industrial Park, Hanjiang District, Yangzhou City, Jiangsu Province
Contact: Tang Jiafu13951439212
Contact: Wu Weimin13952058396
E-mail:jmkj88@yeah.net
Scan QR Code
Copyright:Yangzhou Jiaming Environmental Protection Technology Co., Ltd.